Creating Steering, Throttle and Brake Dual Rates for Radiomaster MT12
We recommend using the Radiomaster MT12 transmitter due to its support for ExpressLRS open-source long-range transmission protocol. After all, our aim is to enable you to race beyond the visual…
How to Import and Restore Model on Radiomaster MT12 (EdgeTX)
If you have a model that you wish to use immediately on your Radiomaster MT12 transmitter, here’s a quick and easy tutorial on how to do it. Since MT12 uses…
Installing FPV Camera on Arrma Limitless – A Detailed Tutorial
Attaching an onboard camera on a Limitless RC car doesn’t have to be complicated. There are multiple FPV systems to choose with a variety of methods to install them. FPVing…
Mounting Motor Cooling Fans on Arrma Limitless
It goes without saying that if you’re racing, speed running, or bashing your Limitless, installing a cooling fan on your motor is considered a must. This detailed tutorial aims to…
Building Arrma Limitless – Applying Decals – Part 8
This is the 8th part and the final part of our tutorial series on how to build Arrma Limitless from zero to hero. In our part 7 tutorial, we covered…
Building Arrma Limitless – Spray Painting The Body – Part 7
This is part 7 of our tutorial series on how to build Arrma Limitless from the ground up. In our part 6 tutorial, we learned how to install a brushless…
Building Arrma Limitless – Installing Motor – Part 6
This is part 6 of our tutorial series on how to build Arrma Limitless from the ground up. In our part 5 tutorial, we learned how to install the servo…
Building Arrma Limitless – Installing Servo Horn – Part 5
This is part 5 of our tutorial series on building Arrma Limitless from scratch. In our part 4, we learned how to install a radio receiver. Now, we shall cover…
Building Arrma Limitless – Installing Receiver – Part 4
This is the 4th part of our tutorial series on building Arrma Limitless from scratch. In our part 3 tutorial, we covered how to install an ESC. Now, we learn…
Building Arrma Limitless – Installing ESC – Part 3
This is part 3 of our tutorial series on how to build Arrma Limitless from the ground up. In our part 2 tutorial, we covered how to install a servo…